-
DVI双联延长器EXT-DVI-FM2500(DVI双联光传)使用四芯LC接口光纤,延长双联DVI高清信号到2公里。最高分辨率2560x1600@60Hz(双联)或1920x1200@60Hz(单联)。具有虚拟EDID,兼容HDCP协议。支持单多模光纤传输,单模2km多模500m。
- Extends Dual-link DVI up to 6,600 feet (2000 meters) using single-mode fiber and Virtual DDC
- Extends Dual-link DVI up to 1640 feet (500 meters) using multi-mode fiber and Virtual DDC
- Extends Dual-link DVI up to 330 feet (100 meters) over single-mode or multi-mode fiber plus one CAT-5 cable using Direct DDC
- Supports resolutions up to 2560 x 1600 (Dual-link) or 1920 x 1200 (Single-link)
- Uses 4 fiber strands for dual-link DVI (only 2 strands required for single-link DVI)
- Uses one CAT-5 cable for DDC and control signals (only required for Direct DDC mode)
- HDCP compliant (in Direct DDC mode only)
- Supports DDWG standard for DVI compliant monitors
- Rack-mountable
- Maximum Pixel Clock: 2 x 165 MHz
- Input Video Signal: 1.2V p-p
- Input DDC Signal: 5V p-p (TTL)
- Video Input Connector (Sender): (1) DVI-I 29-pin, female (digital only)
- Video Output Connector (Receiver): (1) DVI-I 29-pin, female (digital only)
- Link Connectors (Sender/Receiver): (4) Type LC fiber connectors (2 x LC Duplex) (only 2 strands required for Single-link DVI)
- Fiber Cable: CAB-LC-XXX (62.5μ multi-mode)
- Direct DDC Link Connector (Sender / Receiver): (1) RJ-45, Shielded
- Power Supply (Sender / Receiver): (2) 12V DC
- Power Consumption: 36W (max.) each
- Dimensions (Sender / Receiver): 8.4" W x 4.2" D x 1.6" H
- Shipping Weight: 5.6 lbs.